Problem solver

Mould remover: how to remove bathroom mould.

Open a window, put on gloves, and spray a bleach-based cleaner such as Xtra Kleen Bleach Power Cleaner directly onto mould on grout, tiles or silicone. Leave it five to ten minutes, scrub with a brush, rinse with water and dry the area. Then run the fan after every shower so it does not grow back.

Reviewed July 2026 · By the Xtra Kleen team

Step by step.

  1. 1

    Ventilate and protect yourself

    Open windows, turn on the exhaust fan and wear gloves. Keep children and pets out of the room.

  2. 2

    Spray the mould

    Spray Bleach Power Cleaner directly onto the affected grout, tiles or silicone from 15–20 cm away. Do not mix it with vinegar, ammonia or other cleaners.

  3. 3

    Leave it to work

    Give it five to ten minutes so the bleach can break down mould staining.

  4. 4

    Scrub and rinse

    Scrub grout lines with a stiff brush, then rinse thoroughly with clean water.

  5. 5

    Dry and repeat if needed

    Dry the area completely. Repeat on stubborn stains; if black stays under the silicone surface, the sealant needs replacing.

Which Xtra Kleen product does the job.

  • Grout, tiles and silicone mould: 500ml Bleach Power Cleaner Multipurpose Spray.
  • Light surface wipe-downs between treatments: Eucalyptus Anti-Bacterial Cleaner.
  • Scrubbing grout lines: Sponge Scourers or a dedicated scrub brush.

Stop mould coming back.

  • Run the exhaust fan during showers and for 15 minutes after.
  • Squeegee walls and screens and hang towels to dry outside the shower.
  • Fix leaking taps and damaged grout promptly.
  • Large areas, mould on plasterboard or ceilings, or recurring growth may signal a moisture problem — get professional advice.

Safety.

Bleach can lighten fabrics and some surfaces, so test first and avoid coloured grout, natural stone and timber. Always follow the label. For the Safety Data Sheet, email martin@pjsas.com.au.

Questions people also ask.

What is the best mould remover for bathrooms?

For black mould on grout, tiles and silicone, a bleach-based spray is the most effective household option. Spray, leave five to ten minutes, scrub and rinse, and ventilate well.

Can I mix bleach and vinegar to kill mould?

No. Mixing bleach with vinegar or ammonia releases toxic gas. Use one product at a time and rinse between them.

Why does mould come back on silicone?

Mould can grow into the silicone itself. If staining remains after treatment, cut out and replace the sealant, then keep the area dry.

More answers on the Xtra Kleen FAQ page.

Products mentioned.